Skip to content
Shop in your own currency - just select your country below
Shop in your own currency - just select your country below
Quick Tip Classic Triple Ignition
November 25, 2023 Steve Kelly

Quick Tip Classic Triple Ignition

A common issue with Classic Triple ignition installations!  The LED on the unit is blinking but there is no spark.  This usually means the coils are not wired up correctly.  The positive terminal on each coil needs to be connected to a solid positive 12 volt or positive earth connection.  Correcting this often fixes the problem
Filed in: BSA, Classic Motorbike, Classic Motorcycle, Classic Triple, Hurricane, Ignition, Rocket 3, Trident
Previous article Why You Should Always Use a Battery on Classic Motorbikes with Electronic Ignition
Next article Important Bulletin Classic Twin Ignition TRI-0006

Comments

F Hillenaar - May 5, 2025

Had a Tri Spark ignition, black box, on my Trident which I installed 17 years ago that was very reliable, no problem at all, which failed. Spoke to Tri spark and got the latest classic triple MK2 system and decided to fit new 12volt coils as coils appeared original to the bike. Easy install and the motor runs smooth and strong. Great choice. excellent ignition and highly recommend.
Frank Hillenaar

Leave a comment

Comments must be approved before appearing

* Required fields

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare